Month: September 2018
[M004] Double Edge Router Assembled!
One evening of CAD. One evening of CAM. One evening of CNC. And it fit together (quite well). This is just held together with precisely located wooden dowel pins. We will add screws tomorrow.
The only missing piece is the actual guide for running the blocks through. That is separate so that it can be “dialed in” to the perfect cutting depth.
[M004] Double Edge Router
Working on another machine to speed up yet another tedious workshop process. Think of it as a special router table that takes 2 routers set to 45 degree angles. The guide (not shown) will allow precise alignment of the work piece AND cover the cutters to prevent injury.
[M003] Auto Loading Jig In Action
Here is an action video of the [M003] Auto Loading Jig in action on our CNC router. Strong spring pressure is exerted on each wooden block up so the top of the block is always flat against the bottom of the Lexan panel on top. This results in consistent routing depth.
Hard Candy
Zech and Ezra made hard candy from scratch. I thought it was great. Next time they will try different flavors.
Barrel Sander (M002) Progress
The Barrel Sander is coming along again, after a small detour to build the (M003) Auto Loading jig. Here is the nine sides bolted inside the barrel. They do three things:
- Make the barrel stronger so the wheels that it turns on have more support than just thin metal.
- Provide a disrupted circle which will cause the materials to actually turn instead of sliding.
- Protect the inside of the barrel from the sanding action.
Eggs and Steak (er.. roast beef)
This has become one of our favorites for breakfast. Perfectly cooked eggs and toast and roast beef… all on a cast iron griddle. This is the breakfast that will power your day…